Comments on: How Does This Turbo List Sound? ?

By: un4m3d4

un4m3d4 — Mon, 21 Dec 2009 09:58:55 +0000

You will probably need 1200cc injectors with that set-up but 1000’s will work I’m sure. Switch out the exhaust manifold, get a downpipe, I like pulsar plugs more than NGKs, don’t bother with a 3″ exhaust, go for a 2 1/2 or 2 1/4 instead since you will need some backpressure to spool the turbo up quicker. Replace the valve seals and springs since they tend to break when you run a higher psi and for the love of god re-flash your ECU or you will waste intense amounts of fuel. And don’t forget, have fun!

By: steve h

steve h — Mon, 21 Dec 2009 04:45:21 +0000

your missin somethings and somethings that you have listed you really dont need.
1. 1000 cc injectors are going to be WAY too big. 750 cc should do you fine…even at max psi
2. your going to have to iether brace the block or use aebs t-sleeves….considering the k-series is an open deck design
3. h-beam rods and lower comp pistons should be on this list
4. the turbo timer is a waste of money….just sit in your car an let it idle instead of spending money on a box to do it for you
5. think the turbo that you have picked out is a little too much, yeah you can use a gt35…but do a little research into a/r and volumetric efficency of both your motor and the turbo itself.
6. as for using it on a bone stock rsx…….say bye bye to the motor. you need a lot of internal work to withstand boost pressure that you want to push through this motor.
other than that it seems like a good list. and good luck

By: DJ

DJ — Sun, 20 Dec 2009 22:25:05 +0000

sorry i have no patients reading all of it…

By: Jason R

Jason R — Sun, 20 Dec 2009 20:01:52 +0000

awesome!