Ok i finally have the money for my build and i cant remember were i read it but vitaras are .5mm too small or something so if i get the 75.5mm vitaras i should have less slappage on startup.
- mine are 75mm and they are fine on the y8. The guy from puerto rico on ebay.. I think its the same guy.. They are pretty tight of a fit.. did you bore it out or something.. A quick hone job isnt going to put you out to .5 extra my nog.
- Mine are 75 in a d16a6 block and there is no slappage. BTW we are now selling sets of 75mm YCP Vitara Pistons / Hastings Rings / SCAT rods for D series for $414 plus shipping. These are the same piston/ring sets FJT is selling on HT. This deal is not on our website, just hit us with an email if you want a set. We did a test fitment of these here in the shop, and the Vitara pins appear to fit without any reaming of the SCAT rod pin ends. You might be able to get away with a plug and play (and just notching the block), but to cover our butts we’ll say… “Have a professional machinist check all clearances and tolerances on all parts before assembly”
Craig
